Diesel engine starting: up to 5.0 L
Working temperature: -20℃-60℃

Model: GG-JS-RATEL

Size: 180*85*35mm

Weight: 398 g

Type C input: 5V - 2A

USB output: 5V - 2A; 5V -- 1A

DC output 5.5 mm: 15 V - 5 A

Jump start output: 12V (on charge) / 16V (on vide)

Full charge temperature: approximately 6 h

Conference Courant: 2000A

Operating temperature: -20℃ ~ 60℃

Protections: Short circuit protection, overload protection, discharge protection

Service life: >3000 cycles

Model: GG-JS-T02

Capacity: 8000 mAh

Type C input: 5V/2A

USB output: 5V/2A

EC5 Output: 12~16V

Starting current: 400A

Crimp starting current: 800A(3S)

Working temperature: -20℃ ~ 60℃

Net weight: 260g

Dimension (length * width * height): 140*78*23mm

Paraquoi es necesario obtener un démarreur de salto?
1.Long life veille, car battery ejected;
2.Prepare for a long driving trip;
3.Your car may not start due to low fuel consumption or winter gel.

Excellent adaptability:

Low temperature start
Intrépida de frío sévère

Misseal Protection -- Safe and effective use of high-quality electrical cores:
Short circuit protection

Surge protection
Constant current protection

Voltage stabilizing protection

Surcharge protection
Thermal protection

Magnetic field protection.

Lithium polymer battery

Démarrage fort a doble esencia diesel:
Motor vehicle up to 6.0 L
Diesel engine vehicle up to 4.0 L

Dual USB interface:
Fast charging phone holder

LED guosion light:
Torch Mode:
Constant light mode
48 hours
Press and hold the "Power" button for 3 seconds and pour the lighter.
Flashing mode:
High frequency flash
Press the pouring flasher on the switch again.
SOS Mode:
3 modes of signal flashing: 3 long flashing modes/3 long flashing modes/3 long flashing modes
48 hours
Press the switch again in SOS mode.

Juste quatre étapes para el arranque la voiture:
1.Insert the clip into the power port and make sure you have enough power.
2.Connect the red clip to the positive electrode of the car battery "+".
Connect the negative electrode of the car battery with the black clip “-”
3.Return the car and remove the car.
4. Remove the clip after starting the vehicle (it is recommended to remove it within 30 seconds).